Filter
Top Products
Calibrating Drive In Circles
This message displays when calibrating the compass.
Drive the vehicle in circles at less than 5 mph (8 km/h)
to complete the calibration. See DIC Compass on
page 3-55 for more information.
Calibration Complete
This message displays when the compass calibration is
complete. See DIC Compass on page 3-55 for more
information.
Change Engine Oil Soon
When this message displays, it means that service
is required for the vehicle. See your dealer/retailer.
See Engine Oil on page 5-18 and Scheduled
Maintenance on page 6-4 for more information.
When you reset the Change Engine Oil Soon message
by clearing it from the display, you still must reset
the engine oil life system separately. For more
information on resetting the engine oil life system,
see Engine Oil Life System on page 5-21.
Check Tire Pressure
This message displays when the pressure in one or
more of the vehicle’s tires needs to be checked. It also
displays Left Front, Right Front, Left Rear, or Right
Rear to indicate which tire. More than one tire pressure
message can be received at a time. To read the other
messages, press the set/reset button. If a tire pressure
message appears, stop as soon as you can. Have the
tire pressures checked and set to those shown on the
Tire Loading Information label. See Tires on page 5-63,
Loading the Vehicle on page 4-21, and Inflation - Tire
Pressure on page 5-72. The DIC display also shows the
tire pressure values. See DIC Operation and Displays on
page 3-50. If the tire pressure is low, the low tire pressure
warning light comes on. See Tire Pressure Light on
page 3-41.
Cruise Set To XXX MPH (km/h)
This message displays whenever the cruise control
is set. See Cruise Control on page 3-13 for more
information.
3-59