Filter
Top Products
Park Brake Released
For vehicles with the Electric Parking Brake, this
message displays when the parking brake has been
released from the set position. See Electric Parking
Brake on page 2-45 for more information.
Park Brake Set
For vehicles with the Electric Parking Brake, this
message displays when the parking brake has been
applied to the set position. See Electric Parking Brake
on page 2-45 for more information.
Parking Assist Off
If the vehicle has the Ultrasonic Rear Parking
Assist (URPA) system, after the vehicle has been
started, this message displays to remind the driver
that the URPA system has been turned off. Press the
set/reset button to acknowledge this message and clear
it from the DIC display. To turn the URPA system
back on, see “Parking Assist” under DIC Operation and
Displays on page 3-50. See Ultrasonic Rear Parking
Assist (URPA) on page 2-54 for more information.
Passenger Door Open
This message displays when the passenger side front
door is not closed completely. Make sure that the door is
closed completely.
Press Brake Pedal to Release Park
Brake
For vehicles with the Electric Parking Brake, this
message displays if you try to release the park
brake system without first pressing the brake pedal.
See Electric Parking Brake on page 2-45 for more
information.
Press Brake To Start Engine
(Automatic Transmission Only)
If the vehicle has the keyless access system, this
message displays if you try to start the engine without
having the brake pressed. The brake needs to be
pressed when starting the engine. See Ignition Positions
(Key Access) on page 2-32 or Ignition Positions (Keyless
Access) on page 2-33 for more information.
Press Start Control To Learn Keys
If the vehicle has the keyless access system, this
message displays when matching new transmitters to
the vehicle. See Keyless Access System Operation
on page 2-9 for more information.
3-64