Remote Keyless Entry (RKE)
System Operation
The Remote Keyless Entry (RKE) transmitter functions
work up to 65 feet (20 m) away from the vehicle.
There are other conditions that can affect the
performance of the transmitter. See Remote
Keyless Entry (RKE) System on page 2-5.
Do not pull on the chrome base of the transmitter.
Q (Lock): Press to lock all the doors.
If enabled through the Driver Information Center (DIC),
the parking lamps may flash once to indicate locking has
occurred. The horn may chirp when
Q is pressed again
within five seconds. See DIC Vehicle Customization on
page 3-71 for additional information.
K (Unlock): Press to unlock the driver door. If K is
pressed again within five seconds, all remaining doors
unlock. The interior lamps come on and stay on for
20 seconds or until the ignition is turned on.
If enabled through the DIC, the parking lamps flash twice
to indicate unlocking has occurred. See DIC Vehicle
Customization on page 3-71.
V (Remote Trunk Release): Press and hold for
about one second to unlock the trunk. The automatic
transmission must be in P (Park) or the manual
transmission must be in Neutral with the parking
brake set.
L (Vehicle Locator/Panic Alarm): Press and release
to locate the vehicle. The turn signal lamps flash and
the horn sounds three times.
Press and hold
L for more than two seconds to
activate the panic alarm. The turn signal lamps flash
and the horn sounds for 30 seconds. The alarm turns off
when the ignition is moved to START or
L is pressed
again. The ignition must be in LOCK/OFF for the panic
alarm to work.
The vehicle comes with two transmitters. Each
transmitter will have a number on top of it, “1” or “2”.
These numbers correspond to the driver of the vehicle.
2-6