Filter
Top Products
Remote Keyless Entry (RKE)
System Operation
The Remote Keyless Entry (RKE) transmitter functions,
including lock, unlock, remote trunk release and vehicle
locator/panic alarm will work up to 65 feet (20 m) away.
There are other conditions which can affect the
performance of the transmitter. See Remote Keyless
Entry (RKE) System on page 2-5.
Q(Lock): Press Q to lock all the doors. If enabled
through the Driver Information Center (DIC), the parking
lamps may flash once to indicate locking has occurred,
or the horn may chirp when
Q is pressed again
within five seconds from the previous press of the lock
button. See DIC Vehicle Customization on page 3-68
for additional information.
" (Unlock): Press " to unlock the driver’s door. If " is
pressed again within five seconds, all remaining
doors will unlock. The interior lamps will come on and
stay on for 20 seconds or until the ignition is turned on.
If enabled through the DIC, the parking lamps will
flash twice to indicate unlocking has occurred. See DIC
Vehicle Customization on page 3-68.
V (Remote Trunk Release): Press and hold V
for about one second to release the trunk lid. The
transmission must be in PARK (P) for this feature to
operate.
L(Vehicle Locator/Panic Alarm): Press and release
Lto locate your vehicle. The turn signal lamps will
flash and the horn will sound three times.
Press and hold
Lfor more than two seconds to
activate the panic alarm. The turn signal lamps will flash
and the horn will sound repeatedly for 30 seconds.
The alarm will turn off when the ignition is moved
to START or
Lis pressed again. The ignition must be
in LOCK/OFF for the panic alarm to work.
2-7