5. Pull the air only hose (F) from the sealant
canister (B).
6. Push the air only hose (F) onto the tire valve stem
and push the lever down to secure in place.
7. Plug the air compressor accessory plug (C) into
an accessory power outlet in the vehicle. See
Accessory Power Outlet(s) on page 3-21 for more
information.
{CAUTION:
Idling the engine in a closed-in place or with
the climate control system off can cause
deadly carbon monoxide (CO). See Engine
Exhaust on page 2-47.
8. Start the vehicle. See Starting the Engine on
page 2-34 for more information. The vehicle must
be running while using the air compressor.
{CAUTION:
Inflating something too much can make it
explode, and you or others could be injured.
Be sure to read the inflator instructions, and
inflate the tire to its recommended pressure.
Do not exceed 36 psi (248 kPa).
9. Push the sealant and compressor kit switch to
the I (on) position.
5-100