Filter
Top Products
8. Inflate the tire up to the recommended inflation
pressure using the air pressure gage (C) on the
top of the unit.
The pressure gage read high while the compressor
is running. Turn the compressor off to get an
accurate reading.
9. Turn off the air compressor by pushing the On/Off
button (B).
10. Unplug the air compressor accessory plug (E) and
wrap it back into place.
{CAUTION:
Storing the tire sealant and compressor kit or
other equipment in the passenger
compartment of the vehicle could cause injury.
In a sudden stop or collision, loose equipment
could strike someone. Store the tire sealant
and compressor kit in the proper place.
11. Disconnect the air only hose (G) and wrap the hose
in the bottom of the sealant and compressor kit.
12. Place the equipment in the original location in the
trunk of your vehicle.
Removal and Installation of the
Sealant Canister
To remove the sealant canister:
1. Unwrap the sealant and air hose.
2. Push the canister release button.
3. Pull up and remove the canister.
4. Replace with a new canister. See your
dealer/retailer for the new canister.
5. Push the new canister into place.
5-92