Filter
Top Products
Care of Your CD or DVD-A Player
Do not add any label to a disc, it could get caught in the
CD/DVD-A player. If a disc is recorded on a personal
computer and a description label is needed, label the top
of the recorded disc with a marking pen.
The use of disc lens cleaners for discs is not advised,
due to the risk of contaminating the lens of the disc
optics with lubricants internal to the CD/DVD-A player
mechanism.
Notice: If a label is added to a CD, or more than
one CD is inserted into the slot at a time, or an
attempt is made to play scratched or damaged CDs,
the CD player could be damaged. While using the
CD player, use only CDs in good condition without
any label, load one CD at a time, and keep the
CD player and the loading slot free of foreign
materials, liquids, and debris.
If an error displays, see “Disc Messages” later in this
section.
Playing an MP3/WMA Disc
Radios with the MP3 feature are capable of playing an
MP3/WMA CD-R or CD-RW disc. Radios with the
DVD Audio feature, are capable of playing MP3/WMA
on DVD+/-R discs. For more information, see Using
an MP3 on page 3-101 later in this section.
Disc Messages
DISC ERROR: If this message displays and/or the disc
ejects, it could be for one of the following reasons:
• The radio system does not support the playlist
format, the compressed audio format, or the data file
format.
• It is very hot. When the temperature returns to
normal, the disc should play.
• You are driving on a very rough road. When the
road becomes smoother, the disc should play.
• The disc is dirty, scratched, wet, or upside down.
• The air is very humid. If so, wait about an hour and
try again.
• There could have been a problem while burning
the disc.
• The label could be caught in the CD/DVD-A player.
If the disc is not playing correctly, for any other
reason, try a known good disc.
If any error occurs repeatedly or if an error cannot be
corrected, contact your dealer/retailer. If the radio
displays an error message, write it down and provide it
to your dealer/retailer when reporting the problem.
3-91