Filter
Top Products
Memory Seat Recall
If your vehicle has this feature, it allows you to select
your preference for the remote memory seat recall
feature. See Memory Seat and Mirrors on page 1-6 for
more information.
Press the customization button until Memory Seat
Recall appears on the DIC display. Press the set/reset
button once to access the settings for this feature.
Then press the menu up/down button to scroll through
the following settings:
Off (default): No remote memory seat recall will occur.
On: The driver’s seat and outside mirrors will
automatically move to the stored driving position when
the unlock button on the Remote Keyless Entry
(RKE) or keyless access transmitter is pressed. The
steering column will also move on vehicles with
the power tilt and telescopic steering feature. See Power
Tilt Wheel and Telescopic Steering Column on
page 3-7 for more information. See “Relearn Remote
Key” under DIC Operation and Displays on page 3-48
for more information on matching transmitters to
driver ID numbers.
No Change: No change will be made to this feature.
The current setting will remain.
To select a setting, press the set/reset button while the
desired setting is displayed on the DIC.
Remote Start
If the vehicle has this feature, it allows you to turn the
remote start feature off or on. The remote start
feature allows you to start the engine from outside of
the vehicle using the Remote Keyless Entry (RKE)
or keyless access transmitter. See Remote Vehicle Start
on page 2-14 for more information.
Press the customization button until Remote Start
appears in the DIC display. Press the set/reset button
once to access the settings for this feature. Then
press the menu up/down button to scroll through the
following settings:
Off: The remote start feature will be disabled.
On (default): The remote start feature will be enabled.
No Change: No change will be made to this feature.
The current setting will remain.
To select a setting, press the set/reset button while the
desired setting is displayed on the DIC.
3-78