Filter
Top Products
10. Inflate the tire up to the recommended inflation
pressure using the air pressure gage on the top
of the unit.
The pressure gage read high while the compressor
is running. Turn the compressor off to get an
accurate reading.
11. Turn off the air compressor by pushing the switch
to the O (off) position.
{CAUTION:
Storing the tire sealant and compressor
kit or other equipment in the passenger
compartment of the vehicle could cause injury.
In a sudden stop or collision, loose equipment
could strike someone. Store the tire sealant
and compressor kit in the proper place.
12. Disconnect the compressor inflator hose and wrap
the hose in the bottom of the sealant and
compressor kit.
13. Place the equipment in the original location of
your vehicle.
Removal and Installation of the
Sealant Canister
To remove the sealant canister:
1. Unlock the air compressor hose from the sealant
canister by pulling up on the lever.
2. Pull the air only hose (F) from the sealant
canister (B).
3. Unwrap the sealant/air hose from the compressor.
5-101