Filter
Top Products
. .
26
LCD REMOTE CONTROL TRANSCEIVER
3. Count Down Timer Setting: Example Set count down timer at 2:30
1. Press and hold the SET button for 3 seconds, with two-melody sound
and the Hours digit flashes for adjusting.
2. Press the SET button 5 times, the LCD screen will shows
icon and
Hours digit is flashes for adjusting.
3. Press the
or button to decrease or increase the Hour digit until
2:xx.
4. Press the SET button once again then the Minutes digit flashes
for adjusting.
5. Press the
or button to decrease or increase the Minute digit
until 2:30.
6. Press the SET button once again then
icon flashes for alert alarm
ON / OFF setting
7. Press the
button to start the count down timer, and the ON icon
will show on the LCD screen. Press
the button to stop the count
down timer, and the OFF icon will show on the LCD screen.
8. Press the SET button for 2 seconds with one-melody sound to confirm
exit the timer program mode.
Note: Maximum is 19 hours.
4. Time Set-Up For Daily Timer Start: Example to AM 6:30
1. Press and hold the SET button for 3 seconds, with two-melody sound
and the Hours digit flashes for adjusting.
2. Press and hold the button for 2 seconds, the LCD screen will flash
/ icon and Hours digit for Hour set-up.
3. Press the or button to decrease or increase the hour digit until
AM 6:00.
4. Press the SET button once again then the minute digit flashes.
5. Press the
or button to decrease or increase the minutes digit until
AM 6:30.
6. Press the SET button for 2 seconds with one-melody sound to confirm
exit the timer program mode.