Filter
Top Products
. .
13
OPERATION
For 2-way LCD Remote Control Transceiver:
2nd
Car Operation:
1. Press the SET button first, within 3 seconds press and hold
the and buttons together for 2 seconds with two beeping
sounds and the icon will display on the LCD screen to
indicate the second transceiver pin code has been learned.
2. With the
icon displayed on the LCD screen, you can
remote control and communicate with the second vehicles
security system. It has two short bi sounds while pressing the button
of the LCD screen transceiver.
Back to 1st Car Operation:
1. Press the SET button first, within 3 seconds press and hold
the and buttons together for 2 seconds with one long
beeping sound, the timer icon will display on the LCD
screen to indicate the system is back to first transceiver pin
code.
2. While the timer icon is displayed on the LCD screen,
you can remote control and communicate with the first vehicles security
system. It has one short bi sound while pressing the button of the LCD
screen transceiver.