Filter
Top Products
. .
20
REMOTE START OPERATION
K. BATTERY REPLACEMENT:
A 1.5V type AAA Alkaline battery powers the Remote Transceiver. When the
power of the battery weakens a icon will be displayed on the LCD screen.
When the old battery is replaced with a new one, there will be beep sound
that indicates the power is up and the clock on the LCD screen returns to
AM12:00 after displaying all the icons. Set the correct time by pressing for
3 seconds before using. (See Timer Setting).
Note : Press the
button two times with the battery removed, then
insert the new battery.
L. THE REMOTE LCD ICON DESCRIPTION CHART :
Door Lock Door Unlock
Your vehicle doors are locked. Your vehicle doors are
unlocked.
Armed Mode Valet Mode
Your vehicle is in armed mode. All the functions are
temporarily on hold.
Remote Transmission In-Range Indicator
You are transmitting the signal The system is within the
to the control unit. remote control range.
Door Open Warning Trunk/Hood Trigger
Doors are opened. Trunk or Hood is opened.
(Zone 3) (Zone 2)
Shock Sensor Trigger Warn Away Trigger
Trigger on Shock Sensor Trigger on Shock Sensor
(Zone 4) (Zone 1)
Engine Starting Engine Running
Your vehicles engine is starting Your vehicles engine is
by remote control. running in remote start mode.
Timer Control Start Temperature Monitor
Engine will automatically start The interior temperature of
at the same time the next day your vehicle.
or every 2 to 3 hours.
ARMED