Bulldog Security 500 Automobile Alarm User Manual


 
. .
17
OPERATION
2 to 3 hour Timer Start with Temperature-Control OFF: This
feature is design for an extreme cold climate usage. The system will
automatically start the vehicle every 2 or 3 hours, to prevent the engine
from freezing and to prevent a vehicle from being hard to start.
A MAXIMUM OF SIX CYCLES CAN OCCUR.
2 to 3 hour timer start with Temperature-control:
If you programmed the temperature ON to operate. The system can be
programmed to automatically start the vehicles engine whenever the
temperature inside the vehicle reaches or drops below the preprogrammed
temperature level. The system will monitor the air temperature every 2 to
3 hours and will only start the engine during extreme cold temperatures.
There are (3) three temperature levels to choose from.
Daily Timer Start: This feature is very useful for the driver who wants to
run the vehicle punctually at the same time the next morning. Before setting
up the Daily Timer Start, you should set you time for engine start. (
see Timer Setting / Timer set-up for Daily Timer Start, page 16)
To ENTER:
1.Press the
button twice to remote start the vehicle. As soon as the
vehicle is running the parking lights will turn on or start flashing.
2.Immediately depress the
button once, within 2 seconds.
3-a. 2 to 3 Hour Timer Start: Rapidly depresses the button. The
parking light will flash (3) times. The siren or horn chirps (3) times. The
vehicle is now programmed to start every 2 to 3 hours.
3-b. Daily Timer Start: Depress the transceiver SET button
first, within 3 seconds press ( ) button. The parking
lights will flash (6) times. The siren chirps (6) times. The
vehicle is now programmed to start at this set time, the
next day. Your set time for the next day, the engine start
flashes for approx. 3 seconds on the LCD screen. After 3
seconds the icon stays displayed on the LCD screen.
4.Press the brake pedal to shut the engine off.