Filter
Top Products
. .
22
REMOTE START OPERATION
Transmitter Description Operation
Button
SET- (2-sec.) Program Count Down Timer ( ) Press within 3 seconds
(10-Minute/20M/30 M/1Hour/ *let the buttons start
1.5H/2.0H) counting down then
flashes
SET - (2-sec.) Enable/Disable Beep Sound (Bi)
While Pressing Button
1. Screen Lamp ON: Press and hold the
SET
button one second, with
one melody sound and the LCD screen lamp will turns on for 5
seconds.
2. Power Save Mode: While the power save mode, the LCD remote
transceiver uses 0 current to save the battery power.
Entry: Press & hold the
SET
button for 5 seconds, with one melody
sound and SAVE icon on the LCD screen to indicate entry the power
save mode. Exit: Press any button of the LCD remote transmitter to
exit the Power Save Mode.
3. Clear the Flash Icon and Melody Sound: Press the
SET
button 3 times within
3 seconds will clear the flash icon and melody sound on the LCD screen transceiver
4. Stop The Trigger Melody Sound: While triggering the alarm the LCD screen will
alert user through melody sound and flashing trigger icon, press any button on
the LCD remote transmitter to stop the melody sound only.
5. Button Lock: It is useful if you want to disable the transmission
function of the remote control temporarily to prevent from any
inadvertent pressing of buttons by others. Press the
SET
button
first, within 3 seconds press and hold the ( ) button for 2 seconds
to activate or cancel the button lock function, the
icon will dis-
played on the LCD screen to show the LCD remote transmitter is on
Button Lock.
6. Vibration / Melody Mode:
It is useful when you are in a noisy place and difficult to hear
beep sound from the remote control as the remote control in
this mode, vibrates if your security system is triggered.
Press the SET button first, within 3 seconds press and hold
the
( ) button for 2 seconds to select the mode of
vibration or melody, the icon will displayed on the LCD
screen to show the LCD remote transceiver is on vibration
mode.