Filter
Top Products
. .
16
OPERATION
D. PIT-STOP FEATURE:
This feature allows the vehicle to remain running after the key has been
removed from the ignition switch. This feature is useful for occasions when
you wish to exit and lock the vehicle for short periods of time, but would
like to leave the engine running and the climate control on.
1. Before turning off the engine, press the button twice on the transmitter
and the LED indicator will flash 3 times to confirm the program was
entered.
2. Turn the ignition key to the OFF position. (The engine will stay running.)
3. The engine will run until the pre-programmed time elapsed or a shutdown
input is received.
Note: For Standard Transmission Vehicles: Before pressing the
button, set the emergency brake first.
E. TURBO COOL-DOWN TIMER MODE: (See Alarm Feature 2 - 5
Programming)
Turbo Cool Down timer mode keeps the engine running after arriving at
your destination for a programmable period of 1, 3 or 5 minutes, This allows
the systems run time to conveniently cool down the turbo after you have
left the vehicle. To activate:
1. While engine is running, place the transmission in the park position and
set the emergency brake.
2. Before turning off the engine, press and release the and buttons
at the same time.
-- The parking light wills turn on to indicate the remote starter has entered
turbo cool down mode. --
3. Turn the ignition key OFF and remove it from the key cylinder.
-- The engine will remain running. --
4. Exit and secure(lock) the vehicle.
-- The engine will remain running until the pre-programmed time has
elapsed.
F. TIMER / TEMPERATURE START:
This unit can be programmed to start and run the engine every 2 or 3
hours or punctually at the same time the next morning, the engine will run
for the programmed running time and then shut down.
IMPORTANT: Timer Start should be used only in open areas, never start
and run the vehicle in an enclosed space such as a garage or carport.