Filter
Top Products
. .
12
OPERATION
S. TRUNK RELEASE (CHANNEL 3) OUTPUT.
Press and hold the
button on the transmitter for two sec-
onds to remote control the trunk release or other connected
electronic devices.
T. CHANNEL 4 TIMER CONTROL OUTPUT
Press the transmitters
(4) and (4) buttons at the
same time to active the Channel 4 function. Channel 4 is user-programmable
timer output. You may program the built-in timer to send a ground signal
for any time duration from 1 second to 120 seconds. For instance, this timer
output may be used to turn on the headlights, power windows or sunroof.
(Factory defaults setting at momentary output.)
U. CHANNEL 5 TIMER CONTROL OUTPUT
Press the transmitters
(5) and (5) buttons at the same time to active
the Channel 5 function. Channel 5 is user-programmable timer output.
You may program the built-in timer to send a ground signal for any time
duration from 1 second to 120 seconds. For instance, this timer output may
be used to turn on the headlights, power windows or sunroof. (Factory
defaults setting at momentary output.)
V. CHANNEL 6 TIMER CONTROL OUTPUT
Press the transmitters (6) and (6) buttons at the same time to active
Channel 6 function. Channel 6 is user-programmable timer output. You may
program the built-in timer to send a ground signal for any time duration
from 1 second to 120 seconds. For instance, this timer output may be used
to turn on the headlights, power windows or sunroof. (Factory defaults
setting at momentary output.)