Filter
Top Products
a Neutral position
b Position with heavy pay-
load
Seat
Removing seat
Make sure ground is level and
firm and park motorcycle.
Turn key in seat lock 1 coun-
terclockwise while pressing
down on the rear of the seat.
Raise the seat at the rear.
If seat is laid on a rough
surface, seat edges can be
damaged.
Lay the seat on the reference
side on a smooth, clean surface,
e.g. on the tank.
Let go of the key and pull the
seat from the retaining bracket
towards the rear.
Installing seat
If too much pressure is ap-
plied in the forward direc-
tion, there is a danger that the
motorcycle will be pushed off its
stand.
4
67
z
Operation