Filter
Top Products
taneously pulling the case out-
ward.
Then lift case out of lower
mounting.
Mounting case
Hook case into lower mounting.
Pull black release lever 1 (RE-
LEASE) upwards while simulta-
neously pushing the case into
upper mounting.
Press black release lever (RE-
LEASE) downward.
Check case for secure hold.
Secure hold
If a case wobbles or is difficult
to fit, it has to be adapted to the
gap between the upper and low-
er mounting. The height of the
lower holder for the case can
be changed on the inside of the
case.
Flat tire kit
with flat tire kit
OA
Stowing flat tire kit
Removing seat ( 67).
Remove screws 1 and side
trim.
To protect the side panel
from scratches, lay it on the
seat.
7
96
z
Accessories