Filter
Top Products
without center stand
OA
Remove rear wheel stand.
Insert ABS sensor into hole
and install screw 1.
Ease brake calipers onto brake
disks.
Install securing screws 2 on left
and right with specified torque.
Front brake caliper on
wheel carrier
22 lb/ft (30 Nm)
Clip in the two retaining clips 1
for the ABS sensor cable on
the brake line.
Remove adhesive tape from
wheel rim.
Press handbrake lever firmly
a number of times until resis-
tance point is felt.
8
112
z
Maintenance