Filter
Top Products
Damping
Setting
The damping must be adjusted
to the road conditions and the
spring preload.
A rough road surface requires
softer damping than a smooth
road surface.
An increase in spring preload
requires firmer damping, a re-
duction in spring preload re-
quires softer damping.
Adjusting damping on rear
wheel
Make sure ground is level and
firm and park motorcycle.
Adjust damping with the toolkit
using the adjusting screw 1.
To increase damping, turn ad-
justing screw 1 in arrow direc-
tion H.
To decrease damping, turn ad-
justing screw 1 in arrow direc-
tion S.
Basic setting of rear
wheel rear-wheel damp-
ing
without Electronic Suspen-
sion Adjustment (ESA II)
OE
Turn adjusting screw as far
as possible in direction of
arrow H, then turn one and
one-half turn in direction of
arrow S (Full tank of gas,
with rider 187 lbs (85 kg))
Electronic suspension
adjustment ESA
with Electronic Suspension Ad-
justment (ESA II)
OE
4
63
z
Operation