Filter
Top Products
Release ABS button within two
seconds.
ABS warning light remains
off or continues to flash.
ABS function is switched on.
As an alternative, the ignition
can also be switched off and
then on again.
If the ABS light continues
to light up after switching
the ignition off and then on again,
an ABS fault has occurred.
Automatic Stability
Control ASC
with automatic Stability Con-
trol
OE
Switching off ASC
function
Switch on the ignition.
The ASC function can al-
so be deactivated while
driving.
Press and hold ASC button 1.
ASC symbol is continuously
displayed.
Release ASC button within two
seconds.
ASC symbol continues to
be displayed.
ASC function is deactivated.
Activating ASC function
Press and hold ASC button 1.
ASC symbol is no longer
displayed; if self-diagnosis
is not completed, it begins to
flash.
Release ASC button within two
seconds.
ASC symbol remains off or
continues to flash.
ASC function is activated.
As an alternative to pressing
the ASC button, the ignition
can also be switched off and
then on again.
4
59
z
Operation