Filter
Top Products
Close connector 1 below head-
light.
Replacing front turn
indicator bulbs
If it is not standing firmly,
the motorcycle could topple
in the course of the operations
described below.
Make sure that the motorcycle is
steady on its stand.
Make sure the ground is level
and firm and park the motorcy-
cle.
Switch off the ignition.
Remove screw 1.
Pull lamp housing on screw
connection side out of mirror
housing.
Remove bulb holder 2 from
lamp housing by turning it
counterclockwise.
Remove bulb 3 from bulb hold-
er.
Replacing defective bulb
Bulbs for flashing turn
indicators, front
W16W / 12 V / 16 W
8
122
z
Maintenance