Filter
Top Products
Install front wheel cover and fit
screws 1 on right and left.
Removing rear wheel
without center stand
OA
Place motorcycle on an auxil-
iary stand; BMW Motorrad rec-
ommends BMW Motorrad rear
wheel stand.
Installing rear-wheel stand
( 117).
with center stand
OA
Make sure ground is level and
firm and place motorcycle on
its center stand.
Remove three screws 1 on the
muffler cover 2.
Take off cover.
Loosen screw 3 on clamp far
enough that the clip can be
twisted.
Do not remove sealing grease
from clamp.
Remove screw 4 on the rear
footrest while supporting the
end muffler.
8
113
z
Maintenance