Filter
Top Products
adjustment is completed, the
display is automatically hidden
again.
Setting loading state
Start engine.
The loading state cannot
be set while driving.
Press button 1.
Current setting is displayed.
Press and hold button 1 until
display changes each time.
Starting from the current state,
the display is in the following or-
der:
One-up
One-up with luggage
Two-up (with luggage)
If no further changes are made,
the loading state is set as indi-
cated.
Tires
Checking tire pressure
Incorrect tire inflation pres-
sure results in poorer hand-
ing characteristics of the motor-
cycle and reduces the life of the
tires.
Ensure proper tire inflation
pressure.
At high road speeds, tire
valves installed perpen-
dicular to the wheel rim have a
tendency to open as a result of
centrifugal force.
In order to avoid a sudden loss of
tire inflation pressure, fit a valve
cap with rubber sealing ring to
the rear tire and make sure that
the cap is screwed on firmly.
Make sure ground is level and
firm and park motorcycle.
Check tire pressures against
data below.
Tire pressure, front
36.3 psi (2.5 bar) (Single rid-
er, with cold tire)
36.3 psi (2.5 bar) (Driver with
passenger and/or load, with
cold tire)
Tire pressure, rear
42.1 psi (2.9 bar) (Single rid-
er, with cold tire)
4
65
z
Operation