BMW K1300S Motorcycle User Manual


 
has been exceeded for the first
time ( 87).
Watch RDC display at higher
speed. A permanent fault has
not occurred until the general
warning light also lights up. In
this case:
Have fault eliminated by a spe-
cialized workshop, preferably
an authorized BMW Motorrad
retailer.
Possible cause:
There is a fault in the radio con-
nection to the RDC sensors.
Possible causes are radio sys-
tems in the surrounding area,
which interfere with the connec-
tion between the RDC control
unit and the sensors.
Watch the RDC display in an-
other environment. A perma-
nent fault has not occurred un-
til the general warning light also
lights up. In this case:
Have fault eliminated by a spe-
cialized workshop, preferably
an authorized BMW Motorrad
retailer.
Sensor defective or
system fault
General warning light shows
yellow.
Tire symbol appears on the
display.
"--" or "-- --" is indicated.
Possible cause:
Wheels without installed RDC
sensors are mounted.
Retrofit wheel set with RDC
sensors.
Possible cause:
One or two RDC sensors have
failed.
Have fault eliminated by a spe-
cialized workshop, preferably
an authorized BMW Motorrad
retailer.
Possible cause:
A system fault has occurred.
Have fault eliminated by a spe-
cialized workshop, preferably
an authorized BMW Motorrad
retailer.
Battery of tire-inflation
pressure sensor weak
General warning light shows
yellow.
RDC! is indicated.
This error message is only
displayed for a short time
following the pre-ride check.
Possible cause:
The battery of the tire inflation
pressure sensor no longer has
its full capacity. The operation of
the tire inflation pressure control
is only ensured for a limited time.
3
40
z
Status indicators