Filter
Top Products
Check the brake pad thickness
with visual inspection. Direction
of view: from right to brake
caliper 1.
Rear brake-pad wear limit
min 0.04 in (min 1.0 mm)
(Only friction material with-
out carrier plate. Brake disk
must not be visible through
bore hole of inner brake
pad.)
If brake disk is visible:
Have the brake pads replaced
by a specialized workshop,
preferably an authorized BMW
Motorrad retailer.
Brake fluid
Checking front brake fluid
level
without center stand
OA
Make sure ground is level
and firm and hold motorcycle
vertically.
with center stand
OA
Make sure ground is level and
firm and place motorcycle on
its center stand.
Move handlebars into straight-
ahead position.
8
104
z
Maintenance