Filter
Top Products
Anhang
Allgemeines Kurzanlei- TourenZieleingabe Zielspeicher Einstellun-
9
Operating introduction
When the system is started for the first time, an operating introduction explaining the
functions of the remote control will appear. Then you can select whether or not this
introduction is shown each time the TravelPilot DX-V is switched on.
Plus Point: You can activate or deactivate the operating introduction at any
time in the “Settings” menu. For more information, please refer to the section
on “Settings”, “Switching the operating introduction on/off”.
Theft protection system
It is possible to activate a coding for your TravelPilot DX-V so that the TravelPilot
DX-V cannot be operated after it has been disconnected from the battery (e.g. in the
event that it is stolen).
If the coding is active, it will be necessary to enter the code number before the unit
can be operated again after it has been disconnected from the battery. You will find
the code number in the TravelPilot DX-V equipment passport. Never keep this pass-
port in your vehicle!
For more information on activating/deactivating the coding and how to switch on cod-
ed equipment after it has been disconnected from the battery, please refer to the
section on “Settings”, “Activating/deactivating the safety code”.
Plus Point: This electronic theft protection system prevents unauthorised
persons from using the TravelPilot DX-V after it has been removed from the
vehicle.
Switching off
For technical reasons it is not possible to switch off the TravelPilot DX-V computer.
However, if required, you can switch off the display by pressing the blue button 5 on
the monitor. Spoken driving recommendations are played even if the display is switched
off. The display can be switched on again by pressing the blue button 5 once more.
General Information
5