Filter
Top Products
22
Entering destinations using coordinates
You can use the icon (coordinate grid) for entering your destinations as coordi-
nates. To do so, you will need to enter the coordinates in degrees of longitude and
latitude.
1. Select the icon in the top line of the “Destination” menu.
Press the
OK
button.
The coordinate input menu is displayed. ✔
You can now enter the coordinates you want under “Destn. position”. If satellite recep-
tion in your area is sufficient, your current position is also shown under “Current posi-
tion”.
2. Select the “Longitude” menu item. Press the
OK
button.
The field for entering the number of degrees is marked. ✔
3. Enter the number of degrees using the buttons. Then press the
button.
The field for entering the number of minutes is marked. ✔
4. Now enter the number of minutes using the buttons. Then press the
button.
The field for entering the number of seconds is marked. ✔
5. Now enter the number of seconds using the buttons. Then press the
OK
button.
The coordinate input menu is displayed again. ✔
6. Now enter the latitude coordinates in the same way.
Then press the
OK
button.
The selection marker is positioned over the icon. You can now start
route guidance using the
OK
button. For further details, read the chapter en-
titled “Route Guidance”.
Note
The switch between north/south and east/west when entering the coordi-
nates takes place automatically when the number of degrees is entered.
Entering destinations