Filter
Top Products
32
Route guidance
Selecting the current position map (North, Automatic, Junction zoom)
There are three different display modes for the current position map:
– Map due north (“North”),
– Map in driving direction (“Automatic”) and
– Map in driving direction or due north (depending on the scale), map scale is
adjusted accordingly (“Junction zoom”).
Plus Point: If the “Junction zoom” mode is set, the map scale will automati-
cally zoom into the junction before a turning-off point.
1. Press
OK
to open the selection menu.
Select “Settings”. Press
OK
.
The “Settings” menu will appear. ✔
2. Select “Location map”. Press .
A selection list for the type of information to be displayed will appear. ✔
3. Mark the desired display mode. Press
OK
.
Route guidance will continue with the map selected. ✔
Adjusting the map scale
The map scale can be selected freely for every map. Scales ranging from 0.05 mi to
500 mi are available. This means that one centimetre on the display can represent a
distance of between 0.05 mi and 500 mi.
1. Press
OK
to open the selection menu.
Select “Scale”. Press
OK
.
The “Change scale” menu will open. ✔
2. Use to select the desired scale. Press
OK
.
The map will appear in the new scale. ✔
Plus Point: You can also use directly in the map display to alter the
scale.