Filter
Top Products
56
Other functions
Map display without route guidance
While driving without active route guidance, you can use the TravelPilot DX-V to dis-
play a map of the surrounding area. This map can display all of the information avail-
able for navigation, e.g. parking garages and public facilities. For more information,
refer to the section on “Route guidance”, “Route guidance in map mode”.
1. To use the map mode without route guidance, mark “Map” in the main menu.
Press
OK
.
A map of the surrounding area will appear. ✔
Plus Point: If the main menu is on display, the system will automatically
switch to the map display after approximately 3 minutes.
Accessing the on-board computer
You can access the integrated on-board computer to display the following data on-
screen: travel time since the beginning of the journey, the driven distance, the current
speed, the average speed and the GPS status.
1. Press the button for longer than two seconds.
The “Info” menu appears. ✔
2. Mark the icon in the top menu line. Press the
OK
button.
The on-board computer’s data are displayed. ✔
You have the option of deleting the displayed values.
3. To do so, mark the icon on the right-hand side. Press the
OK
button.
The data are deleted and calculation of new data begins immediately there-
after. ✔
Displaying the GPS status
1. Mark the “GPS status” menu item. Press the
OK
button.
The menu containing the number of receivable satellites and the current ve-
hicle position is displayed. ✔