Filter
Top Products
2
Pre-Installation Notes.......................................... 3
Operator Class Information............................ 3
Section A: Gate System Design/Installation..... 4
Section B: Preparing the Site ............................ 6
The Concrete Operator Pad............................ 6
Alternate Post Mount ...................................... 6
Placing the Vehicle Detector Loops............... 7
Vehicle Detector Loop Blanking (Shadow).... 8
Electrical Power Requirements...................... 8
Section C: Installing the Operator..................... 9
Placing the RS4000 Pedestal Unit................ 10
Installing the Gate Arm Kit ........................... 11
Electrical Hookup.......................................... 12
Wiring Diagram.............................................. 12
Lightning Protection ..................................... 13
Right/Left Hand Installations........................ 13
Synchronous Operation (Master/Slave)....... 13
READ THESE STATEMENTS CAREFULLY AND FOLLOW THE
INSTRUCTIONS CLOSELY.
The Warning and Caution boxes throughout this manual are there to protect you and your
equipment. Pay close attention to these boxes as you follow the manual.
WARNING
Indicates a MECHANICAL
hazard of INJURY OR
DEATH. Gives instructions
to avoid the hazard.
CAUTION
Indicates a MECHANICAL hazard
of DAMAGE to your gate, gate
operator, or equipment. Gives
instructions to avoid the hazard.
Indicates an ELECTRICAL
hazard of INJURY OR
DEATH. Gives instructions
to avoid the hazard.
WARNING
Indicates an ELECTRICAL hazard
of DAMAGE to your gate, gate
operator, or equipment. Gives
instructions to avoid the hazard.
CAUTION
TABLE OF CONTENTS
Figure 1
WARNING HIGH VOLTAGE
ONLY A QUALIFIED TECHNICIAN SHOULD SERVICE THIS GATE OPERATOR
PERIODICALLY TEST SENSITIVITY OF OVERLOAD
*** READ MANUAL ***
DATES
OPERATOR
DATE TESTED DATE TESTED DATE TESTED DATE TESTED
SERVICED
LOG DATE OVERLOAD TEST
Accessory Equipment Hookup.....................14
Terminal Strip Reference Chart........... 15 & 16
Section D: Starting the Operator .....................16
Setting the Limit Switches............................16
Setting the Adjustable Torque Drive............17
Running the RS4000 Plus .............................18
Maximum Run Timer .....................................19
Final Setting of Close Timer .........................19
Section E: Auxiliary Equipment.......................19
Section F: End User Instructions .....................19
Operational Guide for the End User.............19
Safety Guide for the End User......................20
Optional Arm Disconnect Feature................21
RS4000 Exploded View & Parts List.................22
Technical Specifications...................................24