ALK Technologies Symbian S60 GPS Receiver User Manual


 
- 42 -
Using Help Files
CoPilot provides extensive Help Files, available on your desktop/laptop
and your Smartphone, to guide you through the program as you use it.
To access Help on your Smartphone, once the CoPilot application is
launched, press Options > Help.
In the desktop application, click on the Help button in any window to
open a Help topic that describes how to use that window, or use the
Help menu and select Help Contents and Search.
Software Registration
Registered users are entitled to technical support, discounts on
new versions of CoPilot, new product information, and software
enhancements.
NOTE: Software activation does NOT register your software, they are
two separate processes.
In North America: Go to www.alk.com and click “Support Center”
In Europe: Go to www.alk.eu.com and click “Support Center”.
5. The Activation Wizard will appear at the end of installation.
Activation occurs just as it did when you originally installed CoPilot
(see p. 4-5).
ON YOUR SMARTPHONE:
IMPORTANT: You must install and activate CoPilot to your
Smartphone using your Base Product Key AND you must have data
downloaded to your Smartphone before using your Expansion Product
Key.
1. Open CoPilot on your Smartphone.
2. From the bottom of the screen, select Options > Settings >
Licence.
3. Enter your Expansion Product Key (found in your order confi rmation
e-mail) when prompted to enter a Product Key.
4. Follow the on-screen instructions.
5. Activation occurs just as it did when you originally installed CoPilot
(see p. 4-5).
If you have any questions about this process, please visit our Support
Center at www.alk.com (North America) or www.alk.eu.com
(Europe) or send an e-mail to support@alk.com.
Region Selection
If you purchased an additional data region, when downloading map data
to your Smartphone from your desktop PC or laptop, you will need to
make sure the proper region is active. To do this, on your desktop in
Planning mode click the Map menu > Region > and check the desired
region. Then restart CoPilot.