Acr & Abbr-2 G24-L AT Commands Reference Manual April 15, 2008
C CTS
RS232 pin used for HW flow control. The MGOM uses this pin to stop data transmission
from the DTE (on the TXD pin).
D DA
Destination Address
D DCD
Data Carrier Detect
D DCE
Data Communication Equipment (G24)
D DCSs
Data Coding Schemas
D DLC
Data Link Connection
D DLC0
The multiplexer control channel.
D DLCI
Data Link Connection Identifier
D DSP
Digital Signal Processor
D DSR
Data Set Ready
D DSR
MGOM is ON and ready to communicate with the DTE device.
D DT
Discharge Time
D DTE
Data Terminal Equipment (such as terminals, PCs and so on). Also called Application
Processor (AP).
D DTMF
Dual-Tone Multi-Frequency
D DTR
Data Terminal Ready
E EF
Elementary Files
E EONS
Enhanced Operator Name String
E ERM
Error Recovery Mode
E ESC
Exit to Command Mode from Data Mode (usually the +++ sequence)
E ETSI
European Telecommunication Standards Institute
F FCC
Federal Communications Commission (U.S.)
F FO
First Octet
F FTA
Full Type Approval
G GCF
GSM Certification Forum
G GGSN
Gate GPRS Support Node
G GPIO
General Purpose Input/Output
G GPRS
General Packet Radio Service
G GRLC
General RS232 Logical Channel - This channel can handle the 07.07/07.05 AT command
set (CSD, FAX, GPRS, Voice, Network AT, and so on.)
G GSM
Global System for Mobile Communications
Abbreviation Full Name
