A SERVICE OF

logo

UI (User Interface)
3-224 G24-L AT Commands Reference Manual April 15, 2008
&Y, Default User Profile
The following table shows the &Y parameters.
Example
AT&Y0
OK
AT&Y1
OK
Command
Type
Syntax Response/Action
Set
&Y<n> OK
or:
+CME ERROR: <err>
Table 3-147: &Y Parameters
<Parameter> Description
<n> User’s profile number:
0 Selects power-up configuration to user’s profile 0
1 Selects power-up configuration to user’s profile 1
The default value is 0.