GPRS
3-248 G24-L AT Commands Reference Manual April 15, 2008
Profile download is performed automatically during device initialization, with no user
intervention required.
The following table shows the +MTKR parameters.
Example
AT+MTKR?
+MTKR: 2F6FFFFFFF0E1F1F4300001F2300000003
OK
Profile Structure
The profile lists those STK facilities supported by the G24-L.One bit is used to code each facility:
• If bit = 1, facility is supported
• If bit = 0, facility is not supported
The following tables describe the contents of each bit in the profile.
Command
Type Syntax Response/Action Remarks
Read
The Read command
displays the current STK
profile.
Table 3-163: +MTKR Parameters
<Parameter> Description
<profile> Displayed in hexadecimal characters, each byte of the profile is represented by two
characters:
First character Higher nibble (bits 4-7)
Second character Lower nibble (bits 0-3)
The bits are displayed in the following order:
<byte 1 higher nibble><byte 1 lower nibble><byte 2 higher nibble><byte 2 lower
nibble> (and so on)
Table 3-164: Profile Structure – Byte 1 (Download)
Bit Description
b1 Profile download
b2 SMS-PP data download
b3 Cell Broadcast data download
b4 Menu selection
