Appendix A: Reference Tables
April 15, 2008 G24-L AT Commands Reference Manual A-15
+VTS
This command transmits DTMF
tones when a voice call is active.
Page 3-176
A
This command answers an
incoming call, placing the G24-L
into the appropriate mode, as
indicated by the RING message.
Page 3-17
A/
This command repeats the last
command entered on the
terminal.
Page 3-177
AT
This command checks the AT
communication and only returns
OK.
Page 3-177
D
This command places a voice call
on the current network, when
issued from an accessory device.
Page 3-11
D*99
This command enables the ME to
perform the actions necessary for
establishing communication
between the terminal and the
external PDN.
Page 3-242
D>
This command places a
voice/fax/data call on the current
network by dialing directly from
the G24-L phone book.
Page 3-12
DL
This command places a voice call
to the last number dialed.
Page 3-14
E
This command defines whether
the G24-L echoes the characters
received from the user, (whether
input characters are echoed to
output).
Page 3-192
F
This command is supported for
backward compatibility only, and
has no effect.
Page 3-304
H
This command hangs up, or
terminates a particular call.
Page 3-15
I
This command requests various
G24-L information items.
Page 3-6
L
This command is supported for
backward compatibility only, and
has no effect.
Page 3-304
M
This command is supported for
backward compatibility only, and
has no effect.
Page 3-304
Table A-1: AT Commands (Alphabetical) (Cont.)
AT Command Description Page
