Appendix A: Reference Tables
April 15, 2008 G24-L AT Commands Reference Manual A-3
\G
This command sets the use of the
software control.
Page 3-197
\J
This command adjusts the
terminal auto rate.
Page 3-197
\K
This command is supported for
backward compatibility only, and
has no effect.
Page 3-304
\N
This command links the type.
Page 3-197
\S
This command displays the status
of selected commands and
S-registers.
Page 3-197
ATS97
This command indicates whether
an antenna is physically
connected to the G24-L RF
connector.
Page 3-143
+CACM
This command resets the Advice
of Charge accumulated call meter
value in the SIM file, EFACM.
Page 3-46
+CALM
This command handles the
selection of the G24’s alert sound
mode.
Page 3-171
+CAMM
This command sets the Advice of
Charge accumulated call meter
maximum value in the SIM file,
EFACMmax.
Page 3-47
+CAOC
This command enables the
subscriber to get information
about the cost of calls.
Page 3-44
+CBAND
This command is supported for
backward compatibility only, and
has no effect.
Page 3-197
+CBAUD
This command sets the baud rate.
Page 3-132
+CBC
This command enables a user to
query the battery charger
connection.
Page 3-129
+CBST
This command selects the bearer
service and the connection
element to be used when data
calls are originated.
Page 3-31
+CCFC
This command enables control of
the call-forwarding
supplementary service.
Page 3-27
Table A-1: AT Commands (Alphabetical) (Cont.)
AT Command Description Page
