5. BASE SPECIFICATIONS PARAMETERS
II - 34
# Items Details Setting range (unit)
1090 Lin_RT Linear rotary
axis
Specify how to handle a command for the rotary axis
that exceeds 360°.
0: For absolute value commands that exceed
360°‚ the value will be converted into a
remainder of 360° and the axis will move.
Example: If the command is 420°‚ the applied
value will be 60°.
1: For absolute value commands that exceed
360°‚ the axis will move in the same manner as
a linear axis.
Example: If the command is 420°‚ the axis will
pass the 360° position and will
move to the 60° position.
0/1
1091 Mpoint Ignore
middle point
Specify now to handle the middle point during G28
and G30 reference point return.
0: Move to the reference point after passing the
middle point designated in the program.
1: Ignore the middle point designated in the
program and move straight to the reference
point.
0/1
1092 Tchg _A Replace
tools for
additional
axis
Specify the movement of the additional axis during
tool change position return.
0: The additional axis does not move with the tool
change position return command.
1: After returning the standard axis with the tool
change position return command‚ the
additional axis also returns to the tool change
position.
0/1
1093 Wmvfin Not used.
1094 Tl_SBK
(for L
system
only)
Select life
count for
single block
Select whether to count the data units to be used for
a single block when using the tool life management II
function (L system).
0: Does not count the data units.
1: Count the data units.
0/1
