A SERVICE OF

logo

Open as PDF
next previous
15. Navigation Sensors
2-43
2.33 Anchor Watch
Anchor watch is used to monitor how vessel is staying at anchor. You are able to set limit for movement of vessel at
anchor (Drag circle). If your vessel travels more than the distance set here, the alert "874: Anchor watch" appears.
Your ship's position, where
you start the anchor watch.
Alarm
setting
: Alarm triggered
How to activate anchor watch
1. Open the main menu followed by the Mark menu.
2. Enter desired range value (0.01-9.99(nm)) for the anchor watch in the Range field.
3. Drop the anchor then click the Drop Anchor button. The Start Anchor Watch button appears below the Drop
Anchor button.
4. Click the Start Anchor Watch button to start the anchor watch.
How to deactivate anchor watch
1. Open the main menu followed by the Mark menu.
2. Click the Stop Anchor Watch button.