Filter
Top Products
Periodic maintenance
65
WARNING
EWS00510
● Apply a dab of grease onto the cable end
only. Do not grease the throttle cable be-
cause it could become frozen, which
could cause loss of control.
● Be sure to have a Yamaha dealer lubri-
cate the front and rear suspensions.
ESU12850
Replacing a headlight bulb
WARNING
EWS00530
Keep flammable products and your hands
away from the hot bulb until it has cooled
down.
1. Remove the shroud. (See page 43 for re-
moval procedures.)
2. Disconnect the headlight coupler.
3. Remove the bulb holder cover.
4. Unhook the bulb holder by pushing it in,
then clockwise.
Lubricant:
Low-temperature grease
1. Throttle cable end
1. Lubrication point
1. Lubrication point
1. Headlight coupler
2. Bulb holder cover
U8GL10E0.book Page 65 Friday, May 18, 2007 3:17 PM