Filter
Top Products
Control functions
15
WARNING
EWS00650
If the self-diagnosis warning indicator and
warning light flash continuously, and an
error code is displayed during operation,
there may be some problem with an elec-
trical circuit, couplers, etc.
Note the error code, and then have a
Yamaha dealer inspect the snowmobile as
soon as possible in order to avoid engine
damage.
ESU10530
Engine stop switch “”
The engine stop switch is used to stop the en-
gine in an emergency. Simply push the stop
switch to stop the engine. To start the engine,
pull the stop switch and proceed with starting
the engine. (See pages 31 for engine starting
procedures.)
During the first few rides, practice using the
stop switch so that you can react quickly in an
emergency.
ESU10661
Headlight beam switch
“LIGHTS”
Push the headlight beam switch to change the
headlight to high beam “HI” or to low beam
“LO”.
ESU10670
Grip/thumb warmer adjustment
switch
The grip/thumb warmer adjustment switch
controls the electrically heated handlebar
grips and throttle lever.
1. Warning light “”
2. Self-diagnosis warning indicator “”
3. Two-digit error code
1. Engine stop switch“”
1. Headlight beam switch “LIGHTS”
2. High beam “HI”
3. Low beam “LO”
U8GL10E0.book Page 15 Friday, May 18, 2007 3:17 PM