Control functions
19
WARNING
EWS00090
● Do not drive the snowmobile with the
shroud or covers unfastened or re-
moved.
● Keep your body and clothing away from
rotating parts when servicing the snow-
mobile with the shroud or covers re-
moved.
● Do not touch the hot muffler and engine
during or immediately after operation.
CAUTION:
ECS00370
Make sure that all cables, leads, etc., are
routed properly before installing the
shroud and covers.
ESU10750
Drive guard
The drive guard is designed to cover the V-
belt clutch and V-belt in case parts break or
come loose.
WARNING
EWS00400
● Make sure that the drive guard is tight-
ened securely before operating the
snowmobile.
● Never run the engine with the V-belt or
drive guard removed.
ESU13040
Storage pouch
The storage pouch is located under the
shroud. Use the storage pouch to store the
tool kit, spare parts, such as the V-belt, or oth-
er small items.
To remove the storage pouch
Unhook the swivel hook from the storage
pouch bracket, and then pull out the storage
pouch as shown.
1. Left side cover
1. Drive guard
1. Storage pouch
U8GL10E0.book Page 19 Friday, May 18, 2007 3:17 PM