Filter
Top Products
Control functions
25
ESU10930
Adjusting the rear suspension spring
preload
The spring preload can be adjusted by turning
the spring preload adjusting ring on the center
shock absorber and the spring preload adjust-
er on the rear shock absorber.
FX10MT / FX10MTR / FX10MTRA
FX10 / FX10RT / FX10RTR / FX10RTRA
1. Spring preload adjusting ring
1. Spring preload adjusting ring
2. Spring seat length
Spring preload setting at the center shock
absorber (spring seat length or spring
preload adjusting ring position):
Minimum (soft):
FX10 98.6 mm (3.88 in)
FX10RT / FX10RTR / FX10RTRA
81.4 mm (3.20 in)
FX10MT / FX10MTR / FX10MTRA 1
Standard:
FX10 98.6 mm (3.88 in)
FX10RT / FX10RTR / FX10RTRA
81.4 mm (3.20 in)
FX10MT / FX10MTR / FX10MTRA 3
Maximum (hard):
FX10 108.6 mm (4.28 in)
FX10RT / FX10RTR / FX10RTRA
91.4 mm (3.60 in)
FX10MT / FX10MTR / FX10MTRA 5
* The spring seat length changes ap-
proximately 1.5 mm (0.06 in) with each
full turn of the adjusting ring.
1. Spring preload adjuster
Spring preload setting at the rear shock
absorber (spring preload adjuster posi-
tion):
Minimum (soft):
S
Standard:
M
Maximum (hard):
H
U8GL10E0.book Page 25 Friday, May 18, 2007 3:17 PM