Filter
Top Products
Periodic maintenance
63
1. Lift the rear of the snowmobile onto a suit-
able stand to raise the drive track off the
ground.
2. Loosen the rear axle nut.
3. Start the engine and rotate the drive track
one or two turns. Stop the engine.
4. Check the drive track alignment with the
slide runners. If the alignment is incorrect,
align the drive track by turning the left and
right adjusting nuts.
Shifted to right
Shifted to left
1. Rear axle nut
1. Slide runner
Drive track
alignment
Shifted to
right
Shifted to left
Left adjusting
nut
Turn out Turn in
Right adjust-
ing nut
Turn in Turn out
1. Left adjusting nut
2. Right adjusting nut
1. Forward
2. Gap
3. Slide runner
4. Drive track
5. Slide metal
1. Forward
2. Gap
3. Slide runner
4. Drive track
5. Slide metal
U8GL10E0.book Page 63 Friday, May 18, 2007 3:17 PM