Filter
Top Products
Control functions
26
ESU12751
Adjusting the rear suspension damp-
ing force (FX10 / FX10RT / FX10RTR /
FX10RTRA)
FX10
The compression damping force can be ad-
justed by turning the adjusting screw.
To increase the compression damping force,
turn the adjusting screw in direction (a). To
decrease the compression damping force,
turn the adjusting screw in direction (b).
FX10RT / FX10RTR / FX10RTRA
The compression and rebound damping forc-
es can be adjusted by turning the adjusting
screw or dial.
To increase the compression damping force,
turn the adjusting screw in direction (a). To
decrease the compression damping force,
turn the adjusting screw in direction (b).
1. Compression damping force adjusting
screw
Compression damping force setting:
Minimum (soft):
12 click(s) in direction (b)*
Standard:
6 click(s) in direction (b)*
Maximum (hard):
2 click(s) in direction (b)*
* With the adjusting screw fully turned
lightly in direction (a)
1. Compression damping force adjusting
screw
Compression damping force setting (cen-
ter):
Minimum (soft):
12 click(s) in direction (b)*
Standard:
6 click(s) in direction (b)*
Maximum (hard):
2 click(s) in direction (b)*
* With the adjusting screw fully turned
lightly in direction (a)
1. Compression damping force adjusting
screw
Compression damping force setting
(rear):
Minimum (soft):
12 click(s) in direction (b)*
Standard:
6 click(s) in direction (b)*
Maximum (hard):
2 click(s) in direction (b)*
* With the adjusting screw fully turned
lightly in direction (a)
U8GL10E0.book Page 26 Friday, May 18, 2007 3:17 PM