Filter
Top Products
42
Instruments and controls
Information display
Messages in the display
A message appears in the display whenever
a warning or indicator symbol lights. Once
you have read and understood the message,
press the READ button (A). Read messages
are then erased from the display and stored
in a memory. Messages regarding faults
remain in the memory until the fault has been
remedied.
Very serious fault messages cannot be
erased from the display. They remain in the
display until the fault is remedied.
Messages stored in the memory can be read
again. Press the READ button (A) to see
stored messages. Scroll through the mes-
sages stored in the memory by pressing the
READ button.
Press the READ button to return read mes-
sages to the memory.
NOTE! If a warning message interrupts when
you are in the trip computer menu or wish to
use the telephone, you must first
acknowledge the message by pressing the
READ button (A).