Volvo S60R Automobile User Manual


 
167
Maintenance and service
Replacing bulbs
Dipped beam bulb
Dipped beam
To remove the bulb:
Switch off all lights and turn the ignition
key to position 0.
Remove the cover.
Unplug the connector.
Disconnect the spring clamp. First push
to the right so that the spring disconnects
and then out and down.
Pull out and remove the bulb.
Fitting the dipped beam bulb
To fit:
Fit the new bulb. In can only be
positioned one way.
Press the clamp spring upwards and a
little to the left so that it secures in its
catch.
Plug in the connector.
Refit the cover.
Main beam bulb
Main beam
To remove the bulb:
Switch off all lights and turn the ignition
key to position 0.
Remove the cover.
Pull out the lamp.
Unplug the connector.
Turn the lamp anticlockwise a half turn,
pull out and remove the bulb.