Filter
Top Products
172
Maintenance and service
Replacing bulbs
Number plate lighting
Number plate lighting
– Switch off all lights and turn the ignition
key to position 0.
– Remove the screw with a screwdriver.
– Carefully remove the entire lamp housing
and pull it out. Turn the contact
anticlockwise and pull out the bulb.
– Fit the new bulb.
– Plug in the connector and turn it
clockwise in the lamp housing.
– Refit the entire lamp housing and screw it
into place.
Courtesy lighting
Courtesy lighting
There is courtesy lighting under the
dashboard on the driver and passenger
sides.
– Insert a screwdriver and gently turn so
that the lamp housing comes loose.
– Remove the bulb.
– Fit a new bulb.
– Refit the lamp housing.
Cargo area
Cargo area
– Insert a screwdriver and gently turn so
that the lamp housing comes loose.
– Remove the bulb.
– Fit a new bulb.
– Refit the lamp housing.