Filter
Top Products
135
Starting and driving
BLIS (Blind Spot Information System) – option
Switching off and reactivating BLIS
• BLIS is activated automatically each time
the ignition is switched on. The indicator
lamps in the door panels flash three times
when the ignition is switched on.
• The system can be switched off by
pressing the BLIS button in the switch
panel in the centre console (see illus-
tration above). The LED in the button
goes out when the system is switched off
and a text message is shown in the
display in the dashboard.
• BLIS can be reactivated by pressing the
button. An LED in the button then comes
on, a new text message is shown in the
display and the indicator lamps in the
door panels flash three times. Press the
READ button, see page 42, to clear the
text message.
The messages above are only shown if the
ignition key is in position II (or if the engine is
running) and BLIS is active (i.e. if the driver
has not switched off the system).
BLIS system messages
System
status
Text in the display
BLIS not
functioning
BLIND-SPOT SYST
SERVICE REQUIRED
Right-hand
camera
blocked
BLIND-SPOT SYST R
CAMERA BLOCKED
Left-hand
camera
blocked
BLIND-SPOT SYST L
CAMERA BLOCKED
Both cameras
blocked
BLIND-SPOT SYST
CAMERAS BLOCKED
BLIS system
off
BLIND-SPOT INFO
SYSTEM OFF
BLIS system
on
BLIND-SPOT INFO
SYSTEM ON
BLIS function
reduced
BLIS FUNCTION
REDUCED