Filter
Top Products
31
Safety
Child safety
Folding out the booster cushion
– Fold down the booster cushion.
– Pull apart the Velcro.
– Raise the upper portion back into place.
Check that:
• the seatbelt is in contact with the child’s
body and is not slack or twisted
• the belt lies correctly over the shoulder
• the lap belt is low over the pelvis for
optimum protection
• the belt does not touch the child’s throat
or lie below the shoulder.
– Carefully adjust the position of the head
restraint to suit the child.
Folding in the booster cushion
– Fold down the upper section (A).
– Fasten the Velcro (B).
– Raise the booster cushion into the rear
seat backrest (C).
NOTE! Make sure that both sections of the
booster cushion are secured with the Velcro
strap (B) before folding down. Otherwise the
upper section (A) can become trapped in the
rear seat backrest (C) when the booster
cushion is folded out again.
WARNING!
Repair or replacement should only be per-
formed by an authorised Volvo workshop.
Do not make any modifications or addi-
tions to the booster cushion.
If an integrated booster cushion has been
subjected to a major load, such as in
conjunction with a collision, the entire
booster cushion must be replaced. Even if
the booster cushion appears to be
undamaged, it may not afford the same
level of protection. The booster cushion
must also be replaced if it is heavily worn.